Developing Your Soap Recipe

When I was learning how to make soap, I felt completely overwhelmed by all the information out there. Some recipes are in ounces, others are in grams. Some throw in tablespoons and teaspoons for good measure (ha!). Superfatting is baffling. There are 937 lye calculators out there. Am I an evil person if I use palm oil?

My blog is my space where I sort through information and try to demystify DIY so today, I want to talk a little about developing recipes. I’ve been trying to think of a way to make soaping a little easier for people who don’t have the perfect sized mold or are missing an expensive oil but want to re-work the recipe into something they can use.

Like many good things in life, it all comes down to math. When you’re making soap, the difference between good math and bad math can be a really nice bar and one that burns your skin off. Not really a chance that most people are willing to take, I’m thinking. With all that in mind, this is a step-by-step guide to making your own soap recipe.

1. Determine the capacity of your soap mold in grams or ounces by filling it up with water and weighing the water. Don’t forget to tare the weight of the mold.

2. Calculate how much liquid and total oil you’ll need. This will be determined by what liquid you decide to you to dissolve lye. As a guideline, waters use a 1:3 water to oil ratio where as milks use a 1:2 ratio. Although this is a useful rough estimate, always use a lye calculator to make sure that your recipe will be safe.

Liquids
  • Waters (1:3 ratio)
    • Aloe
    • Beer (freeze first)
    • Coconut water
    • Rosewater
    • Tea
    • Water
  • Milks (1:2 ratio, freeze first)
    • Almond milk
    • Buttermilk
    • Cow’s milk
    • Goat’s milk

Once you’ve chosen a liquid, you can move on in your calculations. I think best visually, so I use charts when I do the math. Let’s use one of my molds as an example. My mold holds 36 oz of water so I put that number in box A2. The recipe I’m using in this example uses water to dissolve the lye, so we’ll use a 1:3 ratio. That means that 75% of the oil/water will be oil (box B2). All that’s left to do is multiply across the row to find out how much water you’ll need in your recipe.

A B C D
1 Mold capacity Percentage  Result
2 Water 36 oz 25% 9 oz
3 Oil 36 oz 75%  27 oz

3. Come up with your oil recipe. This is the science part. Check out my page on soap making lipids to make sure you’ve got the right balance of moisturizing, cleansing, hardness, and bubbles.

Note sure where to start? Try soap queen’s favorite recipes or tips for formulating your own recipe.

Here are some of my bases:

  • Mamoot (1 august 14)
    • 59% olive, 40% coconut, 1% shea
    • Nice and hard, good bubbles, a little drying
  • Mamoot (25 may 14)
    • 70% olive, 20% cocnut, 8% avocado, 2% shea
    • Nice suds, but melts quickly and took days to unmold
  • The Nerdy Farm Wife (4 october 14)
    • 68% olive, 25% coconut, 7% castor
    • Very easy to cut and stamp, bubble and smooth
  • Mamoot (10 december 2014)
    • 30% olive, 30% coconut, 30% palm, 5% castor, 5% avocado
    • Nice and hard the next day, easy to cut and stamp
  • Mamoot (10 december 2014)
    • 30% olive, 30% palm, 20% coconut, 5% sunflower, 2.5% castor, 2.5% avocado
    • Still soft the next day, very hard to stamp and cut cleanly
  • Mamoot (11 december 2014)
    • 32% olive, 32% coconut, 32% palm, 4% sweet almond

To work with percentages in recipes, I use charts again. Let’s do another example. Remember how we found how out how much oil we’ll need in our sample recipe in box D3 above? Let’s put that number in each box in column G.

E F G H
1 Oils 27 oz
2 Olive oil 67% x 27 oz = 18 oz
3 Coconut oil 26% x 27 oz = 7 oz
4  Castor oil 7% x 27 oz = 2 oz

4. Run your oil recipe through a lye calculator to see how much lye you’ll need. I usually go for 5% because it’ll make a bar that’s not so soft that it melts in the shower but still in a safe level.

5. If oils are the science, this is the art part. Create a bar recipe by adding scents, exfoliants, colorants, and other additives. Unless the ingredient mentions otherwise, these parts are added after the soap has reached trace.

Scents
  • Essential oils – Expensive, yes, but worth it in my opinion. They give crispy, unchanging scents and are easily predictable as to what they’ll do to the soap.
  • Fragrance oils – Honestly, I’m not the biggest fan of fragrance oils. I’ve tried a few and they’ve all been so heady that I’ve had to leave my windows open for hours afterward to make my headache go away. I’ve also found that most smell very different in the bottle and after saponification. Plus they’re not much cheaper than essential oils.
Exfoliants
  • Citrus zest
  • Cinnamon
  • Coffee grounds – If you don’t think you’ve added enough, STOP. You probably have. Coffee grinds really are lovely in moderation but painful in excess.
  • Cornmeal
  • Oatmeal – Grind it up so that it doesn’t clog your shower drain
  • Powdered or crushed nuts
  • Seeds – poppy, chia, flax, cranberry, strawberry
  • Tea bag contents
Colorants
  • Red/Pink
    • Australian pink clay
    • Australian red reef clay
    • Brazilian red clay
    • French red clay
    • Moroccan red clay
    • Red oxide
  • Orange
    • Paprika
  • Yellow
    • Brazilian yellow clay
    • Buriti oil
    • Carrot Baby food – Only ingredients can be vegetable/fruit and water; to use, replace half of your liquid with baby food and combine it with lye at the beginning of the recipe
    • Turmeric
  • Green
    • French green clay
    • Green oxide
    • Spirulina
    • Zeolite green clay
  • Blue
  • Purple
    • Alkanet root
    • Brazilian purple clay
  • Pink
  • White
    • Kaolin clay
    • Titanium dioxide
  • Grey
    • Bentonite clay
  • Black
    • Activated charcoal
    • Australian black clay
  • Brown/Tan
    • Cocoa
    • Pumpkin Puree – Replace half of your liquid with baby food and combine it with lye at the beginning of the recipe
Other Additives
  • Clay – Provides slip; good for shaving soaps
  • Dried flowers
  • Honey – A humectant
  • Spices

6. Take notes. You’ll only get better as you make more soap so you might as well start noting now what works and what doesn’t.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s